Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
1 From 4
No results were found for the filter!
2102_1
Ramoser Vario prop 29,6" incl engine...
Scope of delivery: 1x Light 4-blade adjustment hub, 14,0mm drilling, size 32i 1x Motor flange-32i, M14 / Di=10, 6xM5, in the TKD=34mm 4x Propeller blade, size 32i, diameter 29.6"/752mm, Electric max. 6300 1/min, Gas-Engine max. 6000...
€449.92 *
4005_1
central screws
€12.02 *
00-000-04-161-022_1
Special prop hub long for electric...
compensation after starter conversion
€58.10 *
1011_1
Fuelpump
PowerFuel RX-U V2 Fuel pump Product description and features Fuel pump with integrated exhaust and pressure limiting valve. The valve of the PowerFuel RX V2 fuel pump is already integrated ready for connection. Due to use of the head...
€241.92 *
7200_1
Ignitionsystem for flat twin 2-stroke
The Kolm 2-stroke flat ignition can be installed in all common 2-stroke petrol engines. It improves both operation and performance. The set includes everything you need, including magnets and instructions. Contents: 1x hall sensor 2x...
€263.86 *
7201_1
Ignitionsystem for single cylinder...
The Kolm 2-stroke single-cylinder ignition can be installed in all common 2-stroke petrol engines. It improves both operation and performance. The set includes everything you need, including magnets and instructions. Includes: 1x hall...
€201.46 *
00-000-04-161-021_1
Special prop hub for electric starter...
compensation after starter conversion
€52.06 *
00-000-04-161-020_1
Special prop hub for electric starter...
compensation after starter conversion
€52.06 *
2153_1
Oil collection cup 60ml incl. cap
€1.00 *
NT-M5-PK-4_1
Nipple M5
€3.06 *
1007_1
PowerSmoke 740 smoke pump
High grade toothed wheel pump with metallic gear. he pump can be operated either by receiver current (e.g. by a battery switch / dual power supply) or by a separate battery (e.g. 2S LiPo battery). The PowerSmoke 740 HV is the follow-up...
€184.90 *
2012_1
JETI SB-Temp 8 channel temperature...
8 channel temperatur sensor for Jeti. Full support from Jeti device manager 1 x SB-Temp sensor 1 x Patch cable EX-Bus - Supports K and N sensors from -40 to 1600 degrees Celsius - Setting via the Jeti device manager - 41 mmx38 mmx16 mm -...
€69.58 *
1 From 4
Viewed